Graffiti Shadow

Graffiti Shadow Remover – All Surfaces

POWERFUL REMOVAL OF RESIDUAL GRAFFITI SHADOWS LEFT ON BRICK

Product Use:

A powerful caustic mixture for the removal of the residual shadows left on brick, masonry and concrete after graffiti removal.

How to Use:

Dampen a clean cloth with the liquid. Dab and wipe off the graffiti, turning the cloth frequently to ensure the mark is not returned to the surface.

Wipe off any residue with a clean, damp cloth, then rinse the surface. For best results, wash with a mild detergent.

If preferred, apply the liquid with a soft brush, then continue agitating to remove the graffiti. Ensure that the surface is kept wet; if necessary, reapply the liquid. Wipe and rinse as above.

Safety Precautions:

Use in a well-ventilated area. Avoid contact with skin or eyes. Wear chemical-resistant goggles or a visor. Wear rubber (not PVC) gloves and overalls. Splashes to the skin should be washed off with plenty of water. In the event of eye contact, irrigate with clean water. For detailed health and safety information, request a hazard datasheet.

GRAFFITI SHADOW IS FOR PROFESSIONAL USE ONLY. NOT TO BE USED FOR ANY OTHER PURPOSE. NOT FOR RESALE. DO NOT MIX WITH ANY OTHER PRODUCT. TRIAL ON A SMALL INCONSPICUOUS AREA BEFORE FULL APPLICATION.

• USE NEAT – DO NOT DILUTE
• ONLY POUR THE REQUIRED AMOUNT INTO A POLYPROPYLENE CONTAINER.
• DO NOT POUR ANY UNUSED PRODUCT BACK INTO THE CONTAINER AS IT WILL CONTAMINATE THE REST OF THE PRODUCT.
• EVERY USER OF THIS PRODUCT SHOULD WEAR SAFETY GOGGLES AND GLOVES AND CAREFULLY READ ALL APPLICATION AND SAFETY INSTRUCTIONS BEFORE USING.

Warning:

Causes Skin Irritation.
Causes Serious Eye Irritation.
Wash hands thoroughly after handling.
Wear eye protection and protective gloves.
If on skin: Wash with plenty of soap and water.
If in eyes: Rinse cautiously with water for several minutes. Seek medical attention. Remove contact lenses, if present and easy to do. Continue rinsing.
If skin irritation occurs: seek medical advice.