General Purpose Graffiti Wipes

General Purpose Graffiti Remover Wipes

General Purpose Graffiti remover wipes are fast-acting, mild, and easy to use for use on non-porous surfaces including whiteboards, desks, cupboards, filing cabinets, fireboxes, lockers and walls. For the removal of crayon, white out, permanent marker, inks and pencil.

Interior Graffiti removal process:

1. Put on your protective clothing, safety goggles and gloves.
2. Check the surface for excess dirt: The surface does not have to be perfectly clean but if there is substantial dirt it may impede the penetration process and should be cleaned off before removing the graffiti.
3. Test a small hidden area prior to full application.
4. Wash down the surface first with water using a rag or sprayer to remove excess dirt if necessary.
5. Use SMART GENERAL PURPOSE WIPE to remove offending marks or graffiti.
6. Wipe off with a clean cloth or rinse with water and wipe dry.
7. Repeat steps 4-6 if necessary.

Equipment needed

1. Smart General Purpose Graffiti remover wipes.
2. Safety equipment (chemical-resistant gloves, goggles etc).
3. Supply of water.
4. Rags, sponges, triple 000 wire wool.

Wash all equipment used after the job for re-use.

Results and benefits

General Purpose Graffiti remover wipes can dramatically reduce the time it takes to remove graffiti, with no damage to the underlying surface. It works within seconds with a single application and saves our customers significant time and labour without the need to replace equipment or repair surfaces that have been damaged by using inappropriate removal products.