Smart Multi Safe Graffiti Remover

MULTI Safe Graffiti remover is a strong, fast-acting, liquid graffiti remover for exterior and interior surfaces. It safely penetrates and loosens graffiti and makes it easy to remove. It is formulated for use on many different non-porous surfaces both interior and exterior and is very effective at removing graffiti from Polycarbonate toilets and other plastics.

Exterior and Interior Graffiti removal process:

1. Put on your protective clothing, safety goggles  and gloves
2. Check the surface for excess dirt: The surface does not have to be perfectly clean but if there is a lot of traffic film, soot or substantial dirt, it is advisable to clean or power wash this off first.
3. Test a small hidden area prior to full application
4.  Wash down the surface first with water using a rag or sprayer;
5.  Shake the product thoroughly to activate it and pour the required amount of product onto another rag, sponge or triple 000 wire wool and dab liberally onto the graffiti.
6.  Let the product activate on the surface for about 60 seconds, then agitate with a rag, sponge or triple 000 wire wool.
7.  Wash off with water using a new rag.
8.  repeat steps 4-7 if necessary

Equipment needed

1.  Smart MULTI  Safe Graffiti remover
2.  Safety equipment (chemical-resistant gloves, goggles etc)
3.  Supply of water
4.  Rags, sponges, triple 000 wire wool, sprayer

Results and Benefits

MULTI  Safe Graffiti Remover dramatically reduces the time it takes to remove graffiti, one application is effective in removing the typical graffiti, with no damage to the original underlying surface, within minutes saving significant time and labour costs.

Coverage

Varies dependent upon the type of surface material 0.2 – 0.5 litre/m²
Wipes 0.1 – 0.3 litre/m²

MULTI Safe Graffiti remover IS FOR PROFESSIONAL USE ONLY. NOT TO BE USED FOR ANY OTHER PURPOSE. NOT FOR RESALE. DO NOT MIX WITH ANY OTHER PRODUCT. TRIAL ON A SMALL INCONSPICUOUS AREA PRIOR TO FULL APPLICATION.

• USE NEAT – DO NOT DILUTE
• ONLY POUR THE REQUIRED AMOUNT INTO A POLYPROPYLENE CONTAINER DO NOT POUR ANY UNUSED PRODUCT BACK INTO THE CONTAINER AS IT WILL CONTAMINATE THE REST OF THE PRODUCT

EVERY USER OF THIS PRODUCT SHOULD WEAR SAFETY GOGGLES, GLOVES AND CAREFULLY READ ALL APPLICATION AND SAFETY INSTRUCTIONS BEFORE USING 

Ingestion: DO NOT induce vomiting, drink 1 – 2 glasses of water, seek medical attention

Skin Contact: Wash off immediately with plenty of soap and water, remove contaminated clothing, and flush skin with running water. Seek medical attention if irritation or symptoms persist.

Eye Contact: Rinse continuously with water for at least 15 minutes, holding the eyelids open. Seek medical attention.  If can be done easily done remove contact lenses.

Spills/leaks: Absorb on inert absorbent and transfer to a container. Prevent spillage from entering natural waters/land drains.

Fire: Use water fog or fine water spray. Emergency workers to wear full protective clothing including breathing apparatus.