Elite Winter Graffiti Remover – Low Temperatures

An easy-to-use Gel Graffiti remover with deep penetration and fast-acting power for exterior surfaces. Elite Winter Graffiti remover penetrates and loosens spray paint graffiti and allows for easy removal of graffiti from the surface. It is specially formulated for use when temperatures are below 5°c for long periods of time.

Exterior Graffiti removal process:

1. Put on your protective clothing, safety goggles  and gloves
2. Check the surface for excess dirt: The surface does not have to be perfectly clean but if there is a lot of traffic film, soot or substantial dirt, it is advisable to clean or power wash this off first.
3. Test a small hidden area prior to full application
4. Shake the product thoroughly  to activate it and pour the required amount into a polypropylene container
5. Apply with a brush or roller starting from the bottom up
6. wait about 90 seconds then pressure wash off
7. repeat steps 4-6 if necessary

Equipment needed

1. Elite Winter Graffiti remover
2. Safety equipment (chemical-resistant gloves, goggles etc)
3. long-handled roller with a quality roller (re-usable if rinsed properly)
4. Polypropylene container for dispensing
5. If the surface is painted it is advisable to wet the surface before using Elite Winter
6. pressure washer: we recommend 2200 PSI pressure washer and cold water, in cooler temperatures hot water and higher PS1 may be more effective.

FOR PROFESSIONAL USE ONLY. NOT TO BE USED FOR ANY OTHER PURPOSE. NOT FOR RESALE. DO NOT MIX WITH ANY OTHER PRODUCT. TRIAL ON A SMALL INCONSPICUOUS AREA PRIOR TO FULL APPLICATION.

• USE NEAT – DO NOT DILUTE
• ONLY POUR THE REQUIRED AMOUNT INTO A POLYPROPYLENE CONTAINER DO NOT POUR ANY UNUSED PRODUCT BACK INTO THE CONTAINER AS IT WILL CONTAMINATE THE REST OF THE PRODUCT

EVERY USER OF THIS PRODUCT SHOULD WEAR SAFETY GOGGLES, GLOVES AND CAREFULLY READ ALL APPLICATION AND SAFETY INSTRUCTIONS BEFORE USING

Ingestion: DO NOT induce vomiting, drink 1 – 2 glasses of water, and seek medical attention.

Skin Contact: Wash off immediately with plenty of soap and water, remove contaminated clothing, and flush skin with running water. Seek medical attention if irritation or symptoms persist.

Eye Contact: Rinse continuously with water for at least 15 minutes, holding the eyelids open. Seek medical attention.  If it can be done easily, remove contact lenses.

Spills/leaks: Absorb on inert absorbent and transfer to a container. Prevent spillage from entering natural waters/land drains.

Fire: Use water fog or fine water spray. Emergency workers to wear full protective clothing including breathing apparatus.